| |
 |
ADD:No.3£¬Leye street,Liusha industrial,Jianghai district, Jiangmen city,Guangdong province,China
TEL: +86-750-3612206
FAX: +86-750-3612208
MOBILE: 18022926211 Ivan Law
E-mail£ºjmsse@jmsse.cn
|
| |
|
 |
|
| Reminder about the North customers for laminating machine |
| published date: 2011/12/6 Hits: 2151 |
The problem oflaminating machine in Winter
1.roller marks too obvious.
2.the curing effect is not good.
The reason is the northern winter indoor air temperature is low, the film liquid from the tank to the steel rollers have a certain distance, is originally the film liquid 35 degrees to the roll surface, only a few degrees, so the film liquid sticky stiff, in a moment of detaching roller and photographs, with a fine. The UV - curing and drying after the left in the picture, has formed a fine lines, we also call the roll marks or oil lines it after lamination. Because most of the domestic film machine has no heating device, so the film liquid to the heating. The solution is to install a heating device, a constant temperature heating box, let the film liquid remained around 35 degrees, two is the installation of electric heating device in the quantitative coating machine roller, which is the most ideal method is the most feasible. This will greatly reduce roll mark.
The curing effect is not good is the main power of UV coating machine is not enough. The solution is to increase the power, the replacement of the UV transformer, UV lamp. Two is the replacement of the film liquid or choose this professional manufacturers of shuangshui photographic equipment factory to solve your problem.
|
|
|
|
ÖÐÎÄ°æ
English
